Helipad-Light Home > Products > Helipad-Light
Helipad Touchdown and lift-off area lighting
Name:Helipad Touchdown and lift-off area lighting
Model:AH-HP-I-TLOF
Product Introduction:
Where a FATO is established at a surface-level heliport on ground intended for use at night, FATO lights shall be provided except that they may be omitted where the FATO and the TLOF are nearly coincidental or the extent of the FATO is self-evident. FATO lights shall be placed along the edges of the FATO. The lights shall be uniformly spaced as follows: a) for an area in the form of a square or rectangle, at intervals of not more than 50 m with a minimum of four lights on each side including a light at each corner; and b) for any other shaped area, including a circular area, at intervals of not more than 5 m with a minimum of ten lights.
Details Parameters Download
Compliance
ICAO Annex 14 Volume ǁ Heliports 5.3. lights
FAA AC 150/5390-2B Heliport Design Guide / helipad lighting
CAAC MH 5001—2013 Aerodrome technical standards
CAAC MH 5013—2014 Technical Standards of Civil Heliports
Features
Electrical
LED as light source saving power consumption and maintenance, 95% less power than equivalent incandescent light
Power supply available in AC(110-240VAC), DC48V
Physical
Pressure resistance lens allowed the vehicles go through on light
Die-casting aluminum covered by black hard anodizing layer have good corrosion protection and load bearing
IP68 waterproof ensure light work fine underground
Optional
Infrared LED for pilot using NVG(Night Vision Goggles)
Controller for power supplying and turn ON/OFF light
VHF pilot to ground remote radio control
Light intensity adjustable
Application
Helipad/Heliport TLOF areas light
Heliport FATO ares
Helipad lighting Runway light
Helipad lighting taxiway light
Aiming point light
Infrared LED Compatible for NVG
