Products

Helipad-Light Home > Products > Helipad-Light

Helipad Touchdown and Lift-off Area & Aiming Point Inset Light
< >
  • Helipad Touchdown and Lift-off Area & Aiming Point Inset Light
  • Helipad Touchdown and Lift-off Area & Aiming Point Inset Light
  • Helipad Touchdown and Lift-off Area & Aiming Point Inset Light
Helipad Touchdown and Lift-off Area & Aiming Point Inset Light

Name:Helipad Touchdown and Lift-off Area & Aiming Point Inset Light

Model:AH-HP/A

Product Introduction:

Touchdown and lift-off area light emitting green steady burning light at night or in the daytime with poor visibility to provide good visibility. It shall be placed along the edge of the area designated for use as the Touchdown and lift-off area or within a distance of 1.5 m from the edge.

Aiming point lights shall be collocated with the aiming point marking. It always emitting white steady burning light.

Inset light is always be used at locations where the lights are frequently knocked down by aircraft or maintenance vehicles.

Contact Us

Details Parameters Download

Compliance

  1. ICAO Annex 14 Volume ǁ Heliports 5.3.7, 5.3.8

  2. FAA  AC 150/5390-2B Heliport Design Guide

  3. CAP437 (Offshore helipad)

Features

Electrical

  1. LED light source power saving consumption and maintenance working mode, 95% less power than equivalent incandescent light

  2. Power supply available In 120VAC, 220VAC, 48VDC, 24VDC

Physical

  1. Pressure resistance lens allowed the vehicles go through on light

  2. Die-casting aluminum covered by blace hard anodizing layer have good corrosion protection and load bearing

  3. IP68 waterproof ensure light work fine underground

Optional

  1. Infrared LED for pilot using NVG

  2. Controller for power supplying and turn ON/OFF light

 

Application

  1. Helipad/Heliport Touch-down and Lift-off area

  2. Heliport Aming point marking

  3. Helideck

SPECIFICATIONSAH-HP/A Touchdown and 
lift-off Area Inset Light
Light Characteristics
Light SourceUltra high intensity LED 
Available ColorsGreen, White (Other color 
is available)
Intensity(cd)≥100cd
Flash CharacteristicsSteady burning
Operation Mode24hours operation
LED Life Experience(hours)>100,000
Electrical Characteristics
Operating Voltage120VAC, 220VAC, 48VDC, 
24VDC or others
Power(W)20
Physical Characteristics
Body MaterialAnodized Die-casting 
aluminum
Base MaterialPainted aluminum
Overall size(mm)194×194×138
SPECIFICATIONSAH-HP/A Touchdown and 
lift-off Area Inset Light
Installation size(mm)199×199×146
Weight(kg)4.9
Product Life ExpectancyAverage 5 years
Environmental Factors
Ambient Temperature(℃)-55℃~+70℃
Humidity0~100%
Wind Speed80m/s
WaterproofIP68
Compliance
ICAOICAO Annex 14 Volume ǁ 
Heliports 5.3.7, 5.3.8
Options Available
Infrared LED compatitble for 
NVG (Night Vision Goggles)
Marine Treated
Anodized color/


Add:Floor 4, Building 1, Bangtai Industrial Zone, Jixiang Garden, Bantian Street, Longgang District, Shenzhen, Guangdong, China

Tel/Fax:+86-755-89589401 Mail:sales@annhung.com

Message

Name:

Email:

Detail:

Anhang Technology(HK) Company limited.

Follow Us

© Anhang Technology(HK) Company limited. All Rights Reserved.
Anhang Technology(HK) Company limited.

Follow Us